Elite-Air FAT2 220 CFM Crawl Space Ventilator W/ Dehumidistat For Tjernlund V2D

Description

Elite-Air FAT2 220 CFM Dual Fan Crawl Space Ventilator
With Dehumidistat And 8' Line Cord
Specifications:
Capacity: 220 CFM
Motors: 115 Volts ~ 50/60 Hz (2 Motors Included)
0.60 amps maximum
Thermostat: On at 50°F Off at 35°F
Dehumidistat: 20% - 80% RH Range
Dimensions: 18” x 9” x 2” (Face Plate Can Be Trimmed To Approx 14" X 6")
Includes Thermostat To Prevent Operation Below 35°F And Will Return To Operation At 50° F
The FAT2 Simply Plugs Into A Grounded Electrical Outlet
The Elite-Aire FAT2 Crawl Space Ventilator Are Designed To Circulate Fresh Outside Air Into Crawl Spaces Under Homes Based On Humidity Levels. Simply Select The Humidity Level Set Point Between 20% - 80% Relative Humidity Using The Manual Dehumidistat And Walk Away. This Will Help To Prevent Condensation, Mold, Mildew And Wood Rot. It Also Exhausts Radon Gas, Treated Wood Gases And Odors So They Do Not Migrate Into The Home.
One Major Advantage Of The FAT2 Is Each And Every Part On It Is Easily Field Replaceable. You Do Not Have To Purchase A Whole New Unit If An Inexpensive Part Such As The Thermostat Goes Bad.
Can Be Used In Place Of The Tjernlund V2D And MFB Durablow M2D
How Many Do I Need?
Calculate the cubic area of the crawl space by multiplying the length x width x height. Divide this number by 15 to determine the minimum CFM necessary to fully ventilate the space in 15 minutes. Example: 40’ wide x 40’ long x 2’ high crawl space = 3,200 cubic ft. 3,200 cubic ft. divided by 15 minutes = 214 CFM of ventilation.
The FAT2 Crawl Space Vent Fan Is Assembled In The U.S.A.
18 Month Warranty From Date Of Purchase!
8 Foot Long Power Cord